
- Home
- Produits
- SLUDGE PUMP
SLUDGE PUMP
PREXOR has designed, designed and produced a series of "plunger" pumps for pumping sludge at pressures up to 100 bar with low energy consumption.
SLUDGE PUMP HURRICANE TO 3 PLUNGER
Maximum flow rate: |
15 m2/h |
Pressure filtration: |
15 bar |
Power consumption: |
9.2 kw |
Feeding: |
triphase 400 V 50Hz |
Maximum speed axis: |
55 giri/min |
Fractionation: |
3 cylinders |
Crankshaft: |
decomposable with clamping, cranks at 120° |
Individual cylinder: |
1.500 c.c. |
Suction: |
DN 80 pn 10 bar |
Delivery: |
DN 65 pn 16 |
Valvs: |
ball valves steel wheel |
Pressure sensing: |
digital sensor diaphragm |
Seal: |
6 packing with adjustable packing and removable cradle port packing |
Friction elements: |
ball-bearing for bank and the big end, Glycodur bush for connecting rod, bushings with graphite tablets between sliders and columns |
Connections: |
flex hoses for suction, valves and pump housings separable with joints concrete type Up to 30 m³/h at 25 bar supplied with inverter |
Advantages:
- Constancy of pressure filtration given by fractionation to three cylinders with cranks to 120°
- Low temperature of the sludge sent with consequent maintenance of the characteristics of the polyelectrolyte
- Avoid subjecting the sludge to high accelerations likely to deteriorate the sludge flocs in favor of a shorter and more effective filtered
- Makes it easy to set a P.I.D. connecting the pressure of the mud (slave) to the oil pressure of the hydraulic cylinders of the filter press, decreasing the mechanical stress and increasing the duration of the clothes
- Energy savings evaluating to about ¼ the energy absorbed compared to a centrifugal
- Demountability thanks to connections with quick couplings “concrete”
- Savings in maintenance, the only wearing parts are the packages packing, compared to the bodies, impellers, mechanical seals and belts of a centrifuge pump
Compared to a centrifuge, the Hurricane pump expresses a low maximum flow rate that extends the filling time of the machine. If a reduction in filling time is required, a small one-port centrifuge with a check valve can be installed in parallel.
SLUDGE PUMP CARNERA TO 2 PLUNGER
Modèle: |
Prexor Carnera 2C 100 – 180 |
Type de pompe: |
un piston alternatif des pistons |
Poids: |
700 kg |
Alimentation: |
elettrica 400 V trifase 50 Hz |
Potenza nominale: |
7.5 kW |
Max dimensione particelle: |
12 mm |
Max pressione erogabile: |
15 bar |
Cilindrata Unitaria: |
1500 cc |
Tenute: |
Doppia a labbro/baderne |